How Much Flooring Does a Type 36 House Need? Here’s How to Calculate It

When building or renovating a type 36 house, one of the important things to prepare is the flooring requirement. An accurate calculation helps determine how much granite or ceramic tile needs to be purchased so the installation process can run more efficiently.

If you buy too little material, the work may be delayed while waiting for additional stock. On the other hand, buying too much can increase unnecessary costs. That is why it is important to understand how to calculate flooring needs correctly.

What Is a Type 36 House?

A type 36 house is a home with a building area of around 36 square meters. This number refers to the building area, not the land size.

This type of house is commonly built on plots measuring 60 m², 72 m², or 90 m², with a layout that may include two bedrooms, one bathroom, a living room, a family area connected to the dining space, and a kitchen.

Even though the building area is the same, flooring needs can still vary depending on the house design, the areas where granite will be installed, and the dimensions of each room.

How Large Is the Floor Area of a Type 36 House?

In general, if the entire interior uses the same flooring material, the installation area may be close to 36 m².

However, in practice, not every area always uses the same granite. For example, the terrace, bathroom, or service area may use different materials, sizes, or surface types.

For that reason, it is better to measure each room individually so the calculation is more accurate.

How to Calculate Flooring Needs for a Type 36 House

1. Calculate the Area of Each Room

Start by measuring the length and width of every room.

Use the formula:

Room area = Length × Width

For example:

• Living room: 3 × 3 m = 9 m²
• Main bedroom: 3 × 3 m = 9 m²
• Second bedroom: 2.5 × 3 m = 7.5 m²
• Kitchen and dining area: 3 × 2.5 m = 7.5 m²
• Corridor: 1 × 3 m = 3 m²

2. Add Up All Installation Areas

Once all room areas have been calculated, add together the areas that will use the same granite.

Example:

9 + 9 + 7.5 + 7.5 + 3 = 36 m²

If certain areas use different materials, do not include them in the same total.

Choose the Ceramic or Granite Size

The next step is to determine the tile size, for example:

• 60 × 60 cm
• 60 × 120 cm
• 80 × 80 cm
• 120 × 120 cm

The selected size will affect the number of tiles and boxes required.

3. Calculate the Number of Tiles per Square Meter

Each granite size covers a different area.

For example:

• A 60 × 60 cm granite tile covers 0.36 m².

The number of tiles can be calculated using:

Total area ÷ area per tile

36 ÷ 0.36 = 100 tiles

Keep in mind that the number of tiles per box may vary depending on the product size. Always check the packaging information before purchasing.

4. Add Extra Material

It is recommended to prepare around 10% additional material.

This allowance can help accommodate cutting during installation and provide replacement material for future needs.

Example Calculation for a Type 36 House

1. Calculate the Requirement Based on Floor Area

Assume the entire 36 m² area will use 60 × 60 cm granite.

Calculation:

36 ÷ 0.36 = 100 tiles

2. Add a 10 Percent Allowance

Add extra material:

100 × 10% = 10 tiles

Total requirement:

100 + 10 = 110 tiles

3. Convert the Tile Requirement into Boxes

After determining the number of tiles, convert it into the number of boxes based on the package quantity of the selected granite.

Because the number of tiles per box differs between product sizes and series, always check the product specifications or use a granite calculator for a more accurate estimate.

Calculate More Easily with the MAGIA Granite Calculator

Manual calculations are relatively straightforward, but the process can be more practical with the MAGIA Granite Calculator. This feature helps estimate the amount of granite needed based on the installation area and selected product size.

1. Enter the Area to Be Covered

Enter the total floor area that will use granite in square meters.

2. Select the Granite Size

Choose the MAGIA granite size you plan to use, such as 60 × 60 cm or another available size.

3. View the Estimated Number of Tiles and Boxes

The system will display an estimate of the number of tiles and boxes needed based on the information entered. This can serve as an initial reference before purchasing.

To calculate your granite requirements more quickly, use the MAGIA Granite Calculator.

After obtaining an estimate, you can also visit a MAGIA showroom through the Store Locator feature on the official website to view the granite collection in person and confirm product availability before visiting.

This way, you can choose the right granite while planning your purchase more easily and accurately.

FAQ

How large is the floor area of a type 36 house?

A type 36 house has a building area of around 36 square meters. However, the actual area that uses granite may vary depending on the layout and room division.

How much extra granite should be prepared?

It is recommended to add around 10% of the total requirement to accommodate cutting during installation and possible future replacement.

How do you calculate the number of granite tiles needed?

Calculate the total installation area, then divide it by the area of one granite tile. After that, add around 10% extra material for a safer estimate.

How can I calculate granite requirements more practically?

You can use the MAGIA Granite Calculator by entering the installation area and selected granite size. The system will provide an estimated number of tiles and boxes required, making the planning process easier.